{"id":3475,"date":"2026-10-09T07:33:42","date_gmt":"2026-10-08T23:33:42","guid":{"rendered":"http:\/\/www.ziubinski.com\/blog\/?p=3475"},"modified":"2026-10-09T07:33:42","modified_gmt":"2026-10-08T23:33:42","slug":"what-are-the-light-transmittance-levels-of-fritted-glass-4a34-687dc5","status":"publish","type":"post","link":"http:\/\/www.ziubinski.com\/blog\/2026\/10\/09\/what-are-the-light-transmittance-levels-of-fritted-glass-4a34-687dc5\/","title":{"rendered":"What are the light transmittance levels of fritted glass?"},"content":{"rendered":"

Hey there, if you\u2019ve ever priced out window solutions for a new office, retail space, or even a fancy residential renovation, you\u2019ve probably stumbled on fritted glass\u2014and right now, one of the most common questions I get is: what the heck are the actual light transmittance levels of this stuff? Full transparency (pun very<\/em> intended), as a fritted glass supplier, I\u2019m not here to hit you with dry, jargon-heavy textbook definitions or confuse you with random numbers that don\u2019t matter for your project. I\u2019m gonna break this down like I would for a contractor, architect, or small business owner who\u2019s just trying to figure out if fritted glass will actually work for their space (no fancy PhD required, promise). Fritted Glass<\/a><\/p>\n

<\/p>\n

First, let\u2019s quick reset what fritted glass is, just in case you landed here and aren\u2019t 100% clued in. It\u2019s basically regular glass (usually tempered or laminated, for durability) that gets tiny, precise dots, lines, or even custom patterns of ceramic \u201cfrit\u201d baked right onto the surface. That frit isn\u2019t paint\u2014 it\u2019s fused permanently, so it won\u2019t chip, peel, or fade for decades, which is why it\u2019s such a go-to for commercial spaces. The whole point of this frit coating? It doesn\u2019t just look cool; it controls light, cuts glare, and even helps with energy bills, but its superpower is transmittance. That\u2019s the percentage of visible light that passes through the glass, right? So if a panel has 50% transmittance, half the sun\u2019s light comes through, the other half is either blocked by the frit or reflected away.<\/p>\n

Here\u2019s the thing I wish more people knew: there\u2019s no single \u201cstandard\u201d transmittance for fritted glass. It\u2019s all about how much frit you add\u2014more frit = lower transmittance, fewer frit = higher transmittance. That\u2019s the core of it, but the numbers aren\u2019t random. We work with standard ranges that are tested and certified, because transmittance isn\u2019t just a fun stat\u2014it affects how comfortable your space feels, how much you spend on lighting, and even how your products look in a retail store (no one wants to set up a display only to have glare wash it out midday).<\/p>\n

Let\u2019s start with the high-transmittance end of the spectrum, because that\u2019s super popular for spaces that want natural light but a little bit of glare control. We regularly do fritted glass with 70-85% visible light transmittance (VLT, for anyone who\u2019s been glossing over this\u2014VLT is the official term here). Wait, that\u2019s almost as high as clear glass, right? The difference is that even at 80% VLT, that tiny layer of frit diffuses harsh, direct sunlight so you don\u2019t get that weird, blinding glare on computer screens or meeting tables. A lot of our office clients go for this range for internal partitions\u2014they want open, bright spaces, but don\u2019t want people squinting at their laptops all day. It\u2019s also great for storefronts that don\u2019t want to block customers from seeing inside, but want a subtle, branded look (like a faint company logo or pattern that\u2019s barely noticeable from far away). The frit here is super sparse\u2014tiny dots spaced really far apart, so most of the light still gets through.<\/p>\n

Next is the middle range, which is probably the most versatile. Most of our projects (whether it\u2019s office exteriors, restaurant walls, or even residential window walls) fall into the 40-69% VLT bracket. This is where the frit starts to be more noticeable, but still doesn\u2019t completely block out sunlight. Let\u2019s put that into real life terms: 50% VLT would be like standing near a tinted car window\u2014you can still see clearly through it, but direct midday sun won\u2019t make the space feel like a sauna. A lot of restaurants use this range for patio enclosures or dining room walls\u2014they want natural light to make the space feel open, but not so much that glare makes it hard to read a menu or watch a sunset. For skyscraper facades, this range balances energy efficiency (less heat gain from the sun, which lowers AC costs) and visibility\u2014people inside can see out, and people on the street can get a sense of what\u2019s going on inside the building. One of our recent clients did a 55% VLT fritted glass facade for a startup office, and they saved like 15% on their lighting bills in the first year\u2014no exaggeration, that\u2019s the kind of result we talk about.<\/p>\n

Now, the low-transmittance side\u2014this is for when you want way more privacy, or you\u2019re in a really sunny climate where heat control is non-negotiable. That\u2019s usually 20-39% VLT, and sometimes even lower, depending on how much frit we apply. Think of this as semi-opaque: you can see shapes, but not specific details through it. A lot of hospitals or clinics use this for exam room windows\u2014they want natural light, but patients don\u2019t want passersby staring in. We also do this for retail back-of-house areas or storage rooms where you want to let light in but not show the clutter. Some luxury homeowners go for 25-30% VLT for home theater walls\u2014you don\u2019t want glare ruining your movie, but you don\u2019t want to be sitting in a dark cave either. And for really extreme cases\u2014like sun-bleached coastal areas, or spaces that get direct sun all day long year-round\u2014we can even go below 20% VLT. That\u2019s almost like a privacy screen, but still lets in light instead of making you flip on overhead lights at 10 a.m.<\/p>\n

Wait, but here\u2019s a question I get all the time: does the type of glass affect transmittance too? Yeah, totally. The frit is the main variable, but if you pair that frit with tinted glass (like gray, bronze, or even blue tint), that will lower VLT even more. For example, if you have a clear glass with 50% VLT, a gray tinted glass with the same amount of frit might come out to 35% VLT. Also, if you go with laminated fritted glass (which is standard for safety, especially in public spaces), the laminate layer can knock 2-5% off transmittance, just because it\u2019s an extra layer of material. Tempered glass is another one\u2014when we temper the glass after applying the frit, that tiny heating process can slightly change the frit\u2019s density, so we have to adjust the frit amount by like 1-2% to hit the exact VLT the client wants. That\u2019s the stuff most suppliers won\u2019t tell you, but as someone who\u2019s been doing this for years, that\u2019s how we make sure every panel is consistent.<\/p>\n

Another big myth I need to bust: more frit doesn\u2019t always mean worse visibility. It\u2019s all about the pattern too. If you use a dot pattern with tiny, spaced dots, even at 30% VLT, you can still see through it clearly, just with a little bit of texture. If you use a solid line or a grid pattern, same transmittance might look more opaque, because the lines block more light in specific areas. That\u2019s why we work with architects and designers to pick patterns that match both the VLT they need and the aesthetic they\u2019re going for. A lot of people come in thinking \u201clow VLT = no visibility\u201d but that\u2019s not true\u2014we\u2019ve done 25% VLT panels where you can still read a book sitting next to the window, you just can\u2019t make out individual faces across the street.<\/p>\n

Now, let\u2019s talk real-world performance, because numbers on a sheet mean nothing if they don\u2019t hold up. I\u2019ve had clients test our fritted glass vs. competitors\u2019 stuff, and the difference in actual VLT is usually within 1-2%, but that\u2019s enough to matter. For example, a client in Phoenix who got a competitor\u2019s 40% VLT panel was complaining that their space was still too hot\u2014turns out, the actual VLT was 36%, because the competitor used a denser frit to cut costs, which also blocked more light and made the heat gain worse. Our 40% VLT panels were calibrated to exactly 40%, so we blocked less light but still had the same glare and heat control, which saved them even more money. That\u2019s the kind of attention to detail that sets us apart, and it\u2019s why all our panels come with a certified VLT rating\u2014no guessing, no marketing fluff.<\/p>\n

Wait, what about double-glazed fritted glass? A lot of projects use insulated glass units (IGUs) for exterior walls, so they have two panes with air in between. The transmittance here is a little different, because we usually apply the frit to the inner surface of one of the panes\u2014 that way, the frit is protected from scratches and weather, but it still works the same way. If you have two panes of fritted glass, that will lower total VLT even more\u2014like, if each pane is 50% VLT, the total is around 25% VLT, because the second pane blocks half the light that gets through the first. That\u2019s something we always go over with clients, because they\u2019ll order a single-pane 50% VLT and then be shocked when their IGU ends up lower.<\/p>\n

At the end of the day, choosing the right fritted glass transmittance is all about your specific space. Do you need to maximize natural light for a retail space? Go 70-85% VLT. Do you need balance for an office facade? 40-69% is your sweet spot. Do you need privacy and heat control for a medical space or sunny home? 20-39% (or lower, if needed) is perfect. The worst mistake people make is picking a VLT based on what a friend used, or what looks cool on Instagram\u2014you have to factor in your location (how much direct sun do you get?), your budget (lower VLT might mean higher upfront cost but lower energy bills), and what you\u2019re using the space for.<\/p>\n

<\/p>\n

If you\u2019re not sure which range is right for you, hit us up\u2014we can send you sample panels of different VLT levels, so you can hold them up to a window and see exactly how they look. No pushy sales pitches, no confusing specs. Just real, practical advice based on hundreds of projects we\u2019ve done over the years. Fritted glass is such a versatile material, but only if you get the transmittance right. Don\u2019t guess\u2014work with someone who knows their stuff. Whether you\u2019re an architect bidding on a big commercial project, a small business owner updating your storefront, or a homeowner doing a major reno, we\u2019ve got you covered. Reach out to us to discuss your next project, and we\u2019ll walk you through every step to make sure you get the perfect fritted glass for your needs.<\/p>\n

Laminated Glass<\/a> References<\/p>\n

    \n
  1. American Architectural Manufacturers Association. (2021). Standard for Visible Light Transmittance of Flat Glass Products. AAMA 140-21.<\/li>\n
  2. Glass Association of North America. (2022). Fritted Glass Design and Performance Guidelines. GNA Technical Bulletin 07-22.<\/li>\n
  3. Building Research Establishment. (2020). Solar Light Transmittance of Coated Glass for Commercial Buildings. BRE Digest 468.<\/li>\n
  4. International Code Council. (2021). Performance Requirements for Safety Glazing Materials. ICC A116-21.<\/li>\n<\/ol>\n
    \n

    Taicang Zhuogao Glass Product Co., Ltd.<\/a>
    With abundant experience, we are one of the most professional fritted glass manufacturers and suppliers in China. We warmly welcome you to wholesale bulk high quality fritted glass made in China here from our factory. We also accept customized orders.
    Address: No. 16 Qianjiang Road, Erlu, Zhanan Industrial Zone, Liuhe Town, Taicang City, Jiangsu Province
    E-mail: wmb@zhuogao-glass.com
    WebSite:     https:\/\/www.cnzhuogao.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"

    Hey there, if you\u2019ve ever priced out window solutions for a new office, retail space, or … What are the light transmittance levels of fritted glass?<\/span>Read more<\/a><\/p>\n","protected":false},"author":225,"featured_media":3475,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[3438],"class_list":["post-3475","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-fritted-glass-4d32-68bbf7"],"_links":{"self":[{"href":"http:\/\/www.ziubinski.com\/blog\/wp-json\/wp\/v2\/posts\/3475","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.ziubinski.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.ziubinski.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.ziubinski.com\/blog\/wp-json\/wp\/v2\/users\/225"}],"replies":[{"embeddable":true,"href":"http:\/\/www.ziubinski.com\/blog\/wp-json\/wp\/v2\/comments?post=3475"}],"version-history":[{"count":0,"href":"http:\/\/www.ziubinski.com\/blog\/wp-json\/wp\/v2\/posts\/3475\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.ziubinski.com\/blog\/wp-json\/wp\/v2\/posts\/3475"}],"wp:attachment":[{"href":"http:\/\/www.ziubinski.com\/blog\/wp-json\/wp\/v2\/media?parent=3475"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.ziubinski.com\/blog\/wp-json\/wp\/v2\/categories?post=3475"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.ziubinski.com\/blog\/wp-json\/wp\/v2\/tags?post=3475"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}